# importing SAT files to "scale"

**URL:** <https://tech-community.robotics.abb.com/t/importing-sat-files-to-scale/1139>\
**Category:** Robot Controller\
**Created:** [April 4, 2007, 4:24pm UTC](https://tech-community.robotics.abb.com/t/importing-sat-files-to-scale/1139 "2007-04-04T16:24:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dan0411](https://avatars.discourse-cdn.com/v4/letter/d/a88e4f/32.png) [@dan0411](https://tech-community.robotics.abb.com/u/dan0411)\
**Post date:** [April 4, 2007, 4:24pm UTC](https://tech-community.robotics.abb.com/t/importing-sat-files-to-scale/1139/1 "2007-04-04T16:24:32Z")

</div>

In 5.07 you could work in CAD/SAT in “inches”, and import them into RS without scaling the drawings. Is there an setting for 5.08 that lets you import SAT files from “inches” into RS?

---

<div class="post-metadata">

**Author:** ![NIKHIL](https://avatars.discourse-cdn.com/v4/letter/n/b782af/32.png) [@NIKHIL](https://tech-community.robotics.abb.com/u/NIKHIL)\
**Post date:** [June 2, 2009, 7:42am UTC](https://tech-community.robotics.abb.com/t/importing-sat-files-to-scale/1139/2 "2009-06-02T07:42:14Z")

</div>

Hi,

it is not available with Rs 5.08