# Initializing error...

**URL:** <https://tech-community.robotics.abb.com/t/initializing-error/422>\
**Category:** RobotStudio\
**Created:** [July 14, 2005, 4:37am UTC](https://tech-community.robotics.abb.com/t/initializing-error/422 "2005-07-14T04:37:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![spaik](https://avatars.discourse-cdn.com/v4/letter/s/e9c0ed/32.png) [@spaik](https://tech-community.robotics.abb.com/u/spaik)\
**Post date:** [July 14, 2005, 4:37am UTC](https://tech-community.robotics.abb.com/t/initializing-error/422/1 "2005-07-14T04:37:02Z")

</div>

Hello

mistary situation…when I restore backup file from real IRC5 controller to VIRC5, this real backup file is working well on real controller.

But after restore the backup file into VIRC5, VIRC5 shows below error and it doesn’t boot… what’s happening?? Is any parameter adjusting needed for VIRC5??..if there is, please show me the way thank you.

---

<div class="post-metadata">

**Author:** ![spaik](https://avatars.discourse-cdn.com/v4/letter/s/e9c0ed/32.png) [@spaik](https://tech-community.robotics.abb.com/u/spaik)\
**Post date:** [July 14, 2005, 4:38am UTC](https://tech-community.robotics.abb.com/t/initializing-error/422/2 "2005-07-14T04:38:29Z")

</div>

one more thing, DSQC-328A and DSQC-378A were installed.

---

<div class="post-metadata">

**Author:** ![Thomas](https://avatars.discourse-cdn.com/v4/letter/t/e36b37/32.png) [@Thomas](https://tech-community.robotics.abb.com/u/Thomas)\
**Post date:** [July 14, 2005, 12:51pm UTC](https://tech-community.robotics.abb.com/t/initializing-error/422/3 "2005-07-14T12:51:24Z")

</div>

Hi Spaik,

Please send an e-mail to the software support address.

If you haven’t got the software support address then please give me your e-mail address so I can send the address to you.

We will need to know which Virtual IRC5, RobotStudio Online and RobotWare version you have.:question:

Please also include a .zip file with the backup that cause the problem.:star:

---

<div class="post-metadata">

**Author:** ![Mario](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/mario/32/3373_2.png) [@Mario](https://tech-community.robotics.abb.com/u/Mario)\
**Post date:** [July 21, 2005, 11:24am UTC](https://tech-community.robotics.abb.com/t/initializing-error/422/4 "2005-07-21T11:24:31Z")

</div>

This error is certainly provoked by the configuration of one IO card during the download of the “EIO.cfg file”. Delete this file in first time, to see if the error disappears. I had the same problem and I modified the following line: -Name “interbus” -UnitType “d351A” -Bus “DeviceNet1” -DN\_Address 10 to… -Name “interbus” -UnitType “Virtual” -Bus “Virtual1” and now it’s Ok !