# irb1600

**URL:** https://tech-community.robotics.abb.com/t/irb1600/345
**Category:** RobotStudio S4
**Created:** [April 22, 2005, 2:22pm UTC](https://tech-community.robotics.abb.com/t/irb1600/345 "2005-04-22T14:22:44Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Thomas\_J](https://avatars.discourse-cdn.com/v4/letter/t/f475e1/32.png) [@Thomas\_J](https://tech-community.robotics.abb.com/u/Thomas_J)
#### Post date: [April 22, 2005, 2:22pm UTC](https://tech-community.robotics.abb.com/t/irb1600/345/1 "2005-04-22T14:22:44Z")

</div>

Is there a VC and robot studio files out for IRB1600 RS3.1?

We have a great need to do simulations with this new robot…

Looking forward to your reply…

with Best Regards

Tom

---

<div class="post-metadata">

### Author: ![Thomas](https://avatars.discourse-cdn.com/v4/letter/t/e36b37/32.png) [@Thomas](https://tech-community.robotics.abb.com/u/Thomas)
#### Post date: [April 29, 2005, 1:12pm UTC](https://tech-community.robotics.abb.com/t/irb1600/345/2 "2005-04-29T13:12:12Z")

</div>

Hi Thomas,

We have a CAD modell of the IRB1600 for RobotStudio 3.1.

But unfortunately there is no support in RobotWare 4.0 for this robot.  
The IRB1600 is only supported by RobotWare 5.0.:grinning:

So it’s not possible to simulate this robot in RobotStudio 3.1, you will have to run your simulations in Virtual IRC5.😉

Best regards,