# IRC5 Multimove Switch

**URL:** <https://tech-community.robotics.abb.com/t/irc5-multimove-switch/12064>\
**Category:** IRC5\
**Created:** [October 28, 2025, 8:31am UTC](https://tech-community.robotics.abb.com/t/irc5-multimove-switch/12064 "2025-10-28T08:31:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ifurkanvural](https://avatars.discourse-cdn.com/v4/letter/i/ee7513/32.png) [@ifurkanvural](https://tech-community.robotics.abb.com/u/ifurkanvural)\
**Post date:** [October 28, 2025, 8:31am UTC](https://tech-community.robotics.abb.com/t/irc5-multimove-switch/12064/1 "2025-10-28T08:31:00Z")

</div>

Hello Friends,

We are trying to create a multimove system with two single IRC5 cabinet. We did and run before like this configuration. There is no problem.

As you know, there is a switch (3HAC045976-001) near main computer. We couldn’t find this switch. Actually it is Jetnet 3005G. It is a gigabit unmanaged ethernet switch.

I would to ask you, Is there any alternative model to use instead of this switch ?  
If yes, it must be configurable for static IP addresses ?

What are the IP addresses of ports ?

Main computer AXC input (Switch port5)  
Axis Computer 1 (Switch port1)  
Axis Computer 2 (Switch port2)  
Axis Computer 3 (Switch port3)  
Axis Computer 4 (Switch port4)