# Is RobotStudio 5.10 supporting S4C+ contr

**URL:** <https://tech-community.robotics.abb.com/t/is-robotstudio-5-10-supporting-s4c-contr/1973>\
**Category:** Robot Controller\
**Created:** [June 30, 2008, 11:18pm UTC](https://tech-community.robotics.abb.com/t/is-robotstudio-5-10-supporting-s4c-contr/1973 "2008-06-30T23:18:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rv\_mahajan](https://avatars.discourse-cdn.com/v4/letter/r/8dc957/32.png) [@rv\_mahajan](https://tech-community.robotics.abb.com/u/rv_mahajan)\
**Post date:** [June 30, 2008, 11:18pm UTC](https://tech-community.robotics.abb.com/t/is-robotstudio-5-10-supporting-s4c-contr/1973/1 "2008-06-30T23:18:18Z")

</div>

Hi,

Please tell me the RobotStudio 5.10 supporting S4C+ controller?

Thank you..

Ram

---

<div class="post-metadata">

**Author:** ![PerSvensson](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/persvensson/32/1040_2.png) [@PerSvensson](https://tech-community.robotics.abb.com/u/PerSvensson)\
**Post date:** [June 30, 2008, 11:36pm UTC](https://tech-community.robotics.abb.com/t/is-robotstudio-5-10-supporting-s4c-contr/1973/2 "2008-06-30T23:36:54Z")

</div>

Hi  
Read this post  
[ABB Robotics Community - Maintenance](http://forums.robotstudio.com/forum_posts.asp?T) ID=2104&PN=3