# Issue: When starting station, station Logic I/O connection are not updated. **URL:** \ **Category:** UpFeed\ **Created:** [February 3, 2017, 4:42pm UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559 "2017-02-03T16:42:37Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![DenisFR](https://avatars.discourse-cdn.com/v4/letter/d/dc4da7/32.png) [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Post date:** [February 3, 2017, 4:42pm UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/1 "2017-02-03T16:42:37Z")
Hello, Each time I start my station I have to edit each I/O Connections to update them. I’ve added Converter with DigitalProperty to 1 to get “True” signal at output. Then connect its output to different robot controller’s DI to get them at high level. But at startup all are low level. ---
**Author:** ![Johannes\_Weiman](https://avatars.discourse-cdn.com/v4/letter/j/e47c2d/32.png) [@Johannes\_Weiman](https://tech-community.robotics.abb.com/u/Johannes_Weiman)\ **Post date:** [February 6, 2017, 10:01am UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/2 "2017-02-06T10:01:10Z")
Hi Denis, Starting with RS 6.05, the I/O connections will be updated automatically after a station is loaded. The controller will be always be updated with the saved value of connected smart components, so connections _from_ the controller will be updated “backwards”. Do you think this will help in your case? Regards, Johannes ---
**Author:** ![DenisFR](https://avatars.discourse-cdn.com/v4/letter/d/dc4da7/32.png) [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Post date:** [February 12, 2017, 5:03pm UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/3 "2017-02-12T17:03:30Z")
Hello, Maybe, will see when it was released. Thanks. ---
**Author:** ![DenisFR](https://avatars.discourse-cdn.com/v4/letter/d/dc4da7/32.png) [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Post date:** [May 12, 2017, 9:04am UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/4 "2017-05-12T09:04:03Z")
Hello, have the same issue in 6.05. When controller restart I have to modify all connections. ---
**Author:** ![Johannes\_Weiman](https://avatars.discourse-cdn.com/v4/letter/j/e47c2d/32.png) [@Johannes\_Weiman](https://tech-community.robotics.abb.com/u/Johannes_Weiman)\ **Post date:** [May 12, 2017, 12:27pm UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/5 "2017-05-12T12:27:44Z")
Could you provide a sample .rspag? Regards, Johannes ---
**Author:** ![DenisFR](https://avatars.discourse-cdn.com/v4/letter/d/dc4da7/32.png) [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Post date:** [May 15, 2017, 4:11pm UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/6 "2017-05-15T16:11:13Z")
At the first start all works fine. Restart controller. Then, nothing works… Have to modify each connection. (just modify and Enter) [TestStationLogic\_SignalsConnections.7z](https://tech-community.robotics.abb.com/uploads/short-url/gtPUdxFx2HgV5aR3oWCZIAj28HD.7z) (61.5 KB) ---
**Author:** ![Johannes\_Weiman](https://avatars.discourse-cdn.com/v4/letter/j/e47c2d/32.png) [@Johannes\_Weiman](https://tech-community.robotics.abb.com/u/Johannes_Weiman)\ **Post date:** [May 16, 2017, 11:39am UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/7 "2017-05-16T11:39:39Z")
Ok, I see now that the connections are only updated after station load and not after controller restart. I will log that as a bug to be fixed in 6.05.01. Regards, Johannes ---
**Author:** ![DenisFR](https://avatars.discourse-cdn.com/v4/letter/d/dc4da7/32.png) [@DenisFR](https://tech-community.robotics.abb.com/u/DenisFR)\ **Post date:** [August 16, 2017, 9:47pm UTC](https://tech-community.robotics.abb.com/t/issue-when-starting-station-station-logic-i-o-connection-are-not-updated/7559/8 "2017-08-16T21:47:44Z")
Fixed in 6.05.01. Thanks