# lathe model not included in courseware 5.

**URL:** <https://tech-community.robotics.abb.com/t/lathe-model-not-included-in-courseware-5/1287>\
**Category:** RobotStudio\
**Created:** [June 27, 2007, 5:48pm UTC](https://tech-community.robotics.abb.com/t/lathe-model-not-included-in-courseware-5/1287 "2007-06-27T17:48:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sturner](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/sturner/32/3432_2.png) [@sturner](https://tech-community.robotics.abb.com/u/sturner)\
**Post date:** [June 27, 2007, 5:48pm UTC](https://tech-community.robotics.abb.com/t/lathe-model-not-included-in-courseware-5/1287/1 "2007-06-27T17:48:15Z")

</div>

Hi

The lathe model is not included in the courseware 5.08.

Where should I be downloading from?

---

<div class="post-metadata">

**Author:** ![sturner](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/sturner/32/3432_2.png) [@sturner](https://tech-community.robotics.abb.com/u/sturner)\
**Post date:** [June 27, 2007, 6:05pm UTC](https://tech-community.robotics.abb.com/t/lathe-model-not-included-in-courseware-5/1287/2 "2007-06-27T18:05:08Z")

</div>

The lathe is in the zip file but because there is an error when unzipping, reporting that it cant create output file Arcweld training.sat nothing is unpacking and overwriting current training files.

I understand that I can manually copy files to location but is there anything wrong with Arcweld training.sat