# Machine tending mentor needed

**URL:** https://tech-community.robotics.abb.com/t/machine-tending-mentor-needed/6711
**Category:** Robot Controller
**Tags:** machine-tending, devicenet, integration
**Created:** [July 14, 2015, 1:38am UTC](https://tech-community.robotics.abb.com/t/machine-tending-mentor-needed/6711 "2015-07-14T01:38:16Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![eh.behb](https://avatars.discourse-cdn.com/v4/letter/e/f6c823/32.png) [@eh.behb](https://tech-community.robotics.abb.com/u/eh.behb)
#### Post date: [July 14, 2015, 1:38am UTC](https://tech-community.robotics.abb.com/t/machine-tending-mentor-needed/6711/1 "2015-07-14T01:38:16Z")

</div>

Could somebody kindly guide me through a machine tending project to connect a CNC mill to an ABB arm?

---

<div class="post-metadata">

### Author: ![Kapten\_andersson](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/kapten_andersson/32/443_2.png) [@Kapten\_andersson](https://tech-community.robotics.abb.com/u/Kapten_andersson)
#### Post date: [August 28, 2015, 7:11am UTC](https://tech-community.robotics.abb.com/t/machine-tending-mentor-needed/6711/2 "2015-08-28T07:11:32Z")

</div>

Hi. i don`t think i can help you with your problem, but i contacted ABB office here in sweden when i was interested of getting more information and knowledge about The machine tending software. And i then visited ABB and they had a small workshop about it. Do you have any ABB office near by that can help you?