# Machining FC GUI

**URL:** <https://tech-community.robotics.abb.com/t/machining-fc-gui/1441>\
**Category:** RobotStudio\
**Created:** [September 19, 2007, 8:26pm UTC](https://tech-community.robotics.abb.com/t/machining-fc-gui/1441 "2007-09-19T20:26:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![j\_proulx](https://avatars.discourse-cdn.com/v4/letter/j/8c91f0/32.png) [@j\_proulx](https://tech-community.robotics.abb.com/u/j_proulx)\
**Post date:** [September 19, 2007, 8:26pm UTC](https://tech-community.robotics.abb.com/t/machining-fc-gui/1441/1 "2007-09-19T20:26:56Z")

</div>

To the moderator. In RW 5.09.02 there is a new additional option, Force Control for Machining GUI. Is it posible to get a virtual additional option key for use in Robot Studio?

BR

Jim Proulx

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [September 25, 2007, 9:11am UTC](https://tech-community.robotics.abb.com/t/machining-fc-gui/1441/2 "2007-09-25T09:11:29Z")

</div>

Hi Jim,

For the moment is it not possible to simulate Force Control in RobotStduio. But we are working on a solution that is planned to be implemented in RW 5.10.
