# Multimove examples **URL:** \ **Category:** RobotStudio\ **Created:** [April 26, 2007, 1:15pm UTC](https://tech-community.robotics.abb.com/t/multimove-examples/1171 "2007-04-26T13:15:08Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![joaof](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@joaof](https://tech-community.robotics.abb.com/u/joaof)\ **Post date:** [April 26, 2007, 1:15pm UTC](https://tech-community.robotics.abb.com/t/multimove-examples/1171/1 "2007-04-26T13:15:08Z")
Hi, I need an example of a program for a multimove coordinate systems! How I can make a robot folow a movement of other robot? It’s my first time with coordinate systems is anyone can help me! Thank’s Best regards, Joao Fidalgo ---
**Author:** ![PerSvensson](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/persvensson/32/1040_2.png) [@PerSvensson](https://tech-community.robotics.abb.com/u/PerSvensson)\ **Post date:** [April 26, 2007, 1:36pm UTC](https://tech-community.robotics.abb.com/t/multimove-examples/1171/2 "2007-04-26T13:36:39Z")
Hi There are 2 multimove demostations installed with RS. - Just open one of them - Answer no on the question if vc should update position. - Restore the backup. Located in "my documents obotstudiosystemsackups - After a restart of the virtual controller you have a working station. Hope this is enough to start with ---
**Author:** ![joaof](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@joaof](https://tech-community.robotics.abb.com/u/joaof)\ **Post date:** [April 27, 2007, 3:25pm UTC](https://tech-community.robotics.abb.com/t/multimove-examples/1171/3 "2007-04-27T15:25:59Z")
Hi PerSvensson Tanks for your help! These examples are very “nice” Now it works and its easy! I was in Sweden on last year in LidKoping and Stokolm! Sweden is a nice country! In July im going to Vasteras visit de ABB factory!