# Multimuve simulation

**URL:** <https://tech-community.robotics.abb.com/t/multimuve-simulation/4932>\
**Category:** RobotStudio\
**Created:** [June 16, 2012, 2:22pm UTC](https://tech-community.robotics.abb.com/t/multimuve-simulation/4932 "2012-06-16T14:22:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![manlux](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@manlux](https://tech-community.robotics.abb.com/u/manlux)\
**Post date:** [June 16, 2012, 2:22pm UTC](https://tech-community.robotics.abb.com/t/multimuve-simulation/4932/1 "2012-06-16T14:22:39Z")

</div>

I ve created multimove system with 2 robots but then i am trying to setup and start simulation i got such message:  
System6: Could not set program pointer to entrypoint for task T\_ROB2 2012-06-16 14:20:12 Controllers  
I ve already added entry point and moved procedures to sequences any clues ?

> **[FileFactory - Simple & Unlimited File Sharing](https://www.filefactory.com/file/5a74svx3u8bb/n/ProjektSystem.rspag)**
>
> FileFactory - The simplest and most reliable file sharing service since 2005. Upload, collaborate, and share files up to 20GB with unlimited downloads.

---

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [July 2, 2012, 11:28am UTC](https://tech-community.robotics.abb.com/t/multimuve-simulation/4932/2 "2012-07-02T11:28:25Z")

</div>

Ensure that you have a working program with a main procedure in each of the tasks.

---

<div class="post-metadata">

**Author:** ![manlux](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@manlux](https://tech-community.robotics.abb.com/u/manlux)\
**Post date:** [July 4, 2012, 3:57pm UTC](https://tech-community.robotics.abb.com/t/multimuve-simulation/4932/3 "2012-07-04T15:57:22Z")

</div>

Several days passed by and still i cant make it work. Can anyone open the station an check whats wrong ?

---

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [July 4, 2012, 5:10pm UTC](https://tech-community.robotics.abb.com/t/multimuve-simulation/4932/4 "2012-07-04T17:10:59Z")

</div>

The file is no longer accessible from the download location, I was not able to download it on the 2nd of july either, when I posted my first reply.

The user community will be happy to assist anyone posting a forum note as much as possible with respect to the time available. The user forum is not the place to turn for urgent support issues related to your particular environment. In that case you should contact your local ABB representative that can forward your issue to our product support team.

---

<div class="post-metadata">

**Author:** ![manlux](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@manlux](https://tech-community.robotics.abb.com/u/manlux)\
**Post date:** [July 4, 2012, 9:01pm UTC](https://tech-community.robotics.abb.com/t/multimuve-simulation/4932/5 "2012-07-04T21:01:18Z")

</div>

Ok, thx anyway