# Non ABB Robots

**URL:** <https://tech-community.robotics.abb.com/t/non-abb-robots/11998>\
**Category:** IRC5\
**Created:** [August 5, 2025, 11:35am UTC](https://tech-community.robotics.abb.com/t/non-abb-robots/11998 "2025-08-05T11:35:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![matti](https://avatars.discourse-cdn.com/v4/letter/m/e480ec/32.png) [@matti](https://tech-community.robotics.abb.com/u/matti)\
**Post date:** [August 5, 2025, 11:35am UTC](https://tech-community.robotics.abb.com/t/non-abb-robots/11998/1 "2025-08-05T11:35:50Z")

</div>

Is there a way meanwhile to use Stand alone Controller or any other method to connect and move (coordinated) a non ABB robot arm to/with IRC5 or Omnicore?

---

<div class="post-metadata">

**Author:** ![XNOR](https://avatars.discourse-cdn.com/v4/letter/x/f0a364/32.png) [@XNOR](https://tech-community.robotics.abb.com/u/XNOR)\
**Post date:** [September 2, 2025, 9:57pm UTC](https://tech-community.robotics.abb.com/t/non-abb-robots/11998/2 "2025-09-02T21:57:57Z")

</div>

They sell an ABB controller for that - ask your rep

---

<div class="post-metadata">

**Author:** ![matti](https://avatars.discourse-cdn.com/v4/letter/m/e480ec/32.png) [@matti](https://tech-community.robotics.abb.com/u/matti)\
**Post date:** [October 7, 2025, 9:06am UTC](https://tech-community.robotics.abb.com/t/non-abb-robots/11998/3 "2025-10-07T09:06:17Z")

</div>

Hallo, yes, they call it “stand alone controller” and there is an software-option for that.  
The question was more about the mechanical conf. (MOC) inside, so they way to do it.