# open a RobotWare 5.61 backup in RobotStudio **URL:** \ **Category:** RobotStudio\ **Created:** [September 12, 2024, 7:41am UTC](https://tech-community.robotics.abb.com/t/open-a-robotware-5-61-backup-in-robotstudio/11603 "2024-09-12T07:41:03Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Mikael\_Olofsson](https://avatars.discourse-cdn.com/v4/letter/m/838e76/32.png) [@Mikael\_Olofsson](https://tech-community.robotics.abb.com/u/Mikael_Olofsson)\ **Post date:** [September 12, 2024, 7:41am UTC](https://tech-community.robotics.abb.com/t/open-a-robotware-5-61-backup-in-robotstudio/11603/1 "2024-09-12T07:41:03Z")
Hi, I have a robot with RobotWare 5.61.04 and I would like to open a backup from it in RobotStudio 2024.2.1. However this particular RW version is not available under the Add-in tab. I’m sure this is a well known an solved problem but I can’t find a solution for it here on the forum. Could someone point me in the right direction on how to get this to work? Thanks ! ---
**Author:** ![SomeTekk](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/sometekk/32/151_2.png) [@SomeTekk](https://tech-community.robotics.abb.com/u/SomeTekk)\ **Post date:** [September 12, 2024, 8:30am UTC](https://tech-community.robotics.abb.com/t/open-a-robotware-5-61-backup-in-robotstudio/11603/2 "2024-09-12T08:30:41Z")
Contact your country’s ABB Robot Tech Support and make a request. ---
**Author:** ![Mikael\_Olofsson](https://avatars.discourse-cdn.com/v4/letter/m/838e76/32.png) [@Mikael\_Olofsson](https://tech-community.robotics.abb.com/u/Mikael_Olofsson)\ **Post date:** [September 12, 2024, 2:42pm UTC](https://tech-community.robotics.abb.com/t/open-a-robotware-5-61-backup-in-robotstudio/11603/3 "2024-09-12T14:42:22Z")
> [@SomeTekk](#): > > Contact your country’s ABB Robot Tech Support and make a request. I did. They sent me the installation files for mo RW version. Thanks!