# Operation in current mode not allowed by safety controller

**URL:** <https://tech-community.robotics.abb.com/t/operation-in-current-mode-not-allowed-by-safety-controller/11025>\
**Category:** OmniCore\
**Tags:** troubleshoot\
**Created:** [February 15, 2023, 5:46pm UTC](https://tech-community.robotics.abb.com/t/operation-in-current-mode-not-allowed-by-safety-controller/11025 "2023-02-15T17:46:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Azhagar](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/azhagar/32/1454_2.png) [@Azhagar](https://tech-community.robotics.abb.com/u/Azhagar)\
**Post date:** [February 15, 2023, 5:46pm UTC](https://tech-community.robotics.abb.com/t/operation-in-current-mode-not-allowed-by-safety-controller/11025/1 "2023-02-15T17:46:49Z")

</div>

How can I switch from manual mode to auto mode pls help.