# Paint Power Pac and Conveyor Tracking \[Painting PowerPac\] **URL:** \ **Category:** PowerPacs\ **Created:** [June 30, 2011, 3:14pm UTC](https://tech-community.robotics.abb.com/t/paint-power-pac-and-conveyor-tracking-painting-powerpac/4270 "2011-06-30T15:14:00Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Lowe1](https://avatars.discourse-cdn.com/v4/letter/l/45deac/32.png) [@Lowe1](https://tech-community.robotics.abb.com/u/Lowe1)\ **Post date:** [June 30, 2011, 3:14pm UTC](https://tech-community.robotics.abb.com/t/paint-power-pac-and-conveyor-tracking-painting-powerpac/4270/1 "2011-06-30T15:14:00Z")
Has anyone had success with using the Paint Power Pac and Conveyor tracking? Everytime I import and process a workpiece the system renames it and detaches it from the conveyor. Then I am not able to re-attach the part to the conveyor because I get conveyor setup errors. ---
**Author:** ![Sudarshan](https://avatars.discourse-cdn.com/v4/letter/s/e495f1/32.png) [@Sudarshan](https://tech-community.robotics.abb.com/u/Sudarshan)\ **Post date:** [July 5, 2011, 11:49am UTC](https://tech-community.robotics.abb.com/t/paint-power-pac-and-conveyor-tracking-painting-powerpac/4270/2 "2011-07-05T11:49:29Z")
Hello, Try to first Process the workpiece to divide it and then attach to the Conveyor. Reason is that after processing a workpiece from Painting Powerpac, the part is divided and saved as a Graphic Component Group (GCG). Hope this helps, sudarshan ---
**Author:** ![Lowe1](https://avatars.discourse-cdn.com/v4/letter/l/45deac/32.png) [@Lowe1](https://tech-community.robotics.abb.com/u/Lowe1)\ **Post date:** [July 11, 2011, 5:22pm UTC](https://tech-community.robotics.abb.com/t/paint-power-pac-and-conveyor-tracking-painting-powerpac/4270/3 "2011-07-11T17:22:21Z")
Thank you, that worked. But I am still having a lot of problems with my part getting divided and then trying to use Auto Stroke. I will start another thread with that problem.