# "Path Tools -\> Translate P" equivalent in PC SDK or RobotStudio SDK

**URL:** <https://tech-community.robotics.abb.com/t/path-tools-translate-p-equivalent-in-pc-sdk-or-robotstudio-sdk/8311>\
**Category:** Developer Tools\
**Created:** [June 15, 2018, 9:09am UTC](https://tech-community.robotics.abb.com/t/path-tools-translate-p-equivalent-in-pc-sdk-or-robotstudio-sdk/8311 "2018-06-15T09:09:27Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![FleeceDesign](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/fleecedesign/32/2475_2.png) [@FleeceDesign](https://tech-community.robotics.abb.com/u/FleeceDesign)\
**Post date:** [June 15, 2018, 9:09am UTC](https://tech-community.robotics.abb.com/t/path-tools-translate-p-equivalent-in-pc-sdk-or-robotstudio-sdk/8311/1 "2018-06-15T09:09:27Z")

</div>

Is there a way to program a path translation in C#? I would prefer to use the RobotStudio PC SDK, but if I have to use a module that is also fine.

In concrete I am looking for a line of code to replace the button in the image.

Best regards,  
Bart Ribbens