# Pick and Drop Advice.
**URL:** https://tech-community.robotics.abb.com/t/pick-and-drop-advice/6027
**Category:** RobotStudio
**Created:** [March 19, 2014, 9:24am UTC](https://tech-community.robotics.abb.com/t/pick-and-drop-advice/6027 "2014-03-19T09:24:17Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@smallie1](https://tech-community.robotics.abb.com/u/smallie1)
#### Post date: [March 19, 2014, 9:24am UTC](https://tech-community.robotics.abb.com/t/pick-and-drop-advice/6027/1 "2014-03-19T09:24:17Z")
Hello, I am new to robot studio so need some help programming a cell, at the moment I have an in-feeder feeing a component into the cell and stopping using a plane sensor, and a robot which runs a path around the component whilst on a pedestal.
What I need help with is how do I pick the part off conveyor with a separate robot place onto the pedestal then remove it from the pedestal when the job is complete?
Thanks
---
### Author:  [@Niklas\_Skoglund](https://tech-community.robotics.abb.com/u/Niklas_Skoglund)
#### Post date: [April 16, 2014, 5:59pm UTC](https://tech-community.robotics.abb.com/t/pick-and-drop-advice/6027/2 "2014-04-16T17:59:19Z")
Hi, you have better chances getting an answer in the main RobotStudio forum. This is for Controller SDK CTP. I can see that we have lots of posts here which are not about Controller SDK.
Before I simply help everybody by moving them over, I would like to ask you if there is something in the user interface in the forum application that would make it easier to see the difference between the different forums
:-\*