# Port no on remote network connection

**URL:** <https://tech-community.robotics.abb.com/t/port-no-on-remote-network-connection/11334>\
**Category:** RobotStudio\
**Created:** [January 22, 2024, 7:12am UTC](https://tech-community.robotics.abb.com/t/port-no-on-remote-network-connection/11334 "2024-01-22T07:12:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hogan](https://avatars.discourse-cdn.com/v4/letter/h/f05b48/32.png) [@Hogan](https://tech-community.robotics.abb.com/u/Hogan)\
**Post date:** [January 22, 2024, 7:12am UTC](https://tech-community.robotics.abb.com/t/port-no-on-remote-network-connection/11334/1 "2024-01-22T07:12:04Z")

</div>

To set up the firewall for remote connection I have found UDP port 5514 and TCP port 5515.

My question is if it is the same for both IRC5 and Omnicore?