# Problem lead-through in the right ribbon

**URL:** <https://tech-community.robotics.abb.com/t/problem-lead-through-in-the-right-ribbon/11969>\
**Category:** Collaborative Robots\
**Tags:** lead-through\
**Created:** [July 1, 2025, 1:41pm UTC](https://tech-community.robotics.abb.com/t/problem-lead-through-in-the-right-ribbon/11969 "2025-07-01T13:41:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![wverwimp](https://avatars.discourse-cdn.com/v4/letter/w/c0e974/32.png) [@wverwimp](https://tech-community.robotics.abb.com/u/wverwimp)\
**Post date:** [July 1, 2025, 1:41pm UTC](https://tech-community.robotics.abb.com/t/problem-lead-through-in-the-right-ribbon/11969/1 "2025-07-01T13:41:38Z")

</div>

When i click at the lead-through in the right ribbon, it is saying it’s not supported. Otherwise when i go to the jog menu i can enable lead-throug. And it is working. So what is going wrong. Before the lead-througt in the ribbon was working, i’ve only made a new program so every program module was erased and the standard was set back again. After restarting this problem occurred. A restore to an older version seems not to be working to reactivated the lead through. Somebody any idea what the problem gives. The lead-through with asi buttons also works.