# Problem with copied path  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/problem-with-copied-path-arcwelding-powerpac/521>\
**Category:** PowerPacs\
**Created:** [November 3, 2005, 4:24pm UTC](https://tech-community.robotics.abb.com/t/problem-with-copied-path-arcwelding-powerpac/521 "2005-11-03T16:24:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andersson](https://avatars.discourse-cdn.com/v4/letter/a/f14d63/32.png) [@Andersson](https://tech-community.robotics.abb.com/u/Andersson)\
**Post date:** [November 3, 2005, 4:24pm UTC](https://tech-community.robotics.abb.com/t/problem-with-copied-path-arcwelding-powerpac/521/1 "2005-11-03T16:24:14Z")

</div>

When copy and paste a path in RS with new targets AWPP doesn’t know the attributes. The path in AWPP becomes in one level.

---

<div class="post-metadata">

**Author:** ![Fredrik\_Syr](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/fredrik_syr/32/3134_2.png) [@Fredrik\_Syr](https://tech-community.robotics.abb.com/u/Fredrik_Syr)\
**Post date:** [November 17, 2005, 1:07am UTC](https://tech-community.robotics.abb.com/t/problem-with-copied-path-arcwelding-powerpac/521/2 "2005-11-17T01:07:07Z")

</div>

We will have a look at this.

Kind Regards  
Fredrik