# Problem with opening station

**URL:** <https://tech-community.robotics.abb.com/t/problem-with-opening-station/7267>\
**Category:** RobotStudio\
**Created:** [July 14, 2016, 7:17am UTC](https://tech-community.robotics.abb.com/t/problem-with-opening-station/7267 "2016-07-14T07:17:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kristijan](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Kristijan](https://tech-community.robotics.abb.com/u/Kristijan)\
**Post date:** [July 14, 2016, 7:17am UTC](https://tech-community.robotics.abb.com/t/problem-with-opening-station/7267/1 "2016-07-14T07:17:01Z")

</div>

# I created a station, saved it and later closed it, now when i am tryin to open it i get an error : RobotStudio .NET exception: C0040702 : One or more files in the system directory is corrupt and cannot be used when launching a VC. IRobVC.Launch()

Base exception: RobApiException  
C0040702 : One or more files in the system directory is corrupt and cannot be used when launching a VC.  
IRobVC.Launch()

I didnt changed the folders location or anything, how can i solve this?

And also yesterday i was able to upload .STP files into robotstudio but today this option is not possible anymore why is that?

---

<div class="post-metadata">

**Author:** ![Pavel\_Riabichev](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@Pavel\_Riabichev](https://tech-community.robotics.abb.com/u/Pavel_Riabichev)\
**Post date:** [July 18, 2016, 5:42am UTC](https://tech-community.robotics.abb.com/t/problem-with-opening-station/7267/2 "2016-07-18T05:42:10Z")

</div>

Hello  
Maybe you can recreate the system. Just copy your RAPID and configurations from the corrupted directory and load them into your new system. You should be able to add a controller from your new system into your old RobotStudio station.  
About importing .stp, try with the 64 bit RobotStudio and make sure you have the CAD conversion licenses.

/Pavel
