# Problems with DigitalSignal Set method **URL:** \ **Category:** Developer Tools\ **Created:** [July 1, 2005, 12:13am UTC](https://tech-community.robotics.abb.com/t/problems-with-digitalsignal-set-method/410 "2005-07-01T00:13:36Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Bryan](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Bryan](https://tech-community.robotics.abb.com/u/Bryan)\ **Post date:** [July 1, 2005, 12:13am UTC](https://tech-community.robotics.abb.com/t/problems-with-digitalsignal-set-method/410/1 "2005-07-01T00:13:36Z")
Hello, I am attempting to use the Set method of the DigitalSignal class in the 5.06 PC RAB SDK. I have no problems reading the signal’s value and I have no problems using the Reset method. However, the Set method fails to turn on the digital output that I am subscribing to. When I call the Set method no errors are thrown. Is this a known bug? If so, when will we see a fix? ---
**Author:** ![Bryan](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Bryan](https://tech-community.robotics.abb.com/u/Bryan)\ **Post date:** [July 1, 2005, 12:25am UTC](https://tech-community.robotics.abb.com/t/problems-with-digitalsignal-set-method/410/2 "2005-07-01T00:25:16Z")
This problem was found on real and virtual controllers running 5.06.0085 and 5.06.0095. PC SDK is the 5.06 beta version issued this week. ---
**Author:** ![Bryan](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Bryan](https://tech-community.robotics.abb.com/u/Bryan)\ **Post date:** [July 1, 2005, 12:36am UTC](https://tech-community.robotics.abb.com/t/problems-with-digitalsignal-set-method/410/3 "2005-07-01T00:36:53Z")
One more piece of information… My IO signals are defined with the following access level: # EIO\_ACCESS: -Name “MY\_ACCESS” -Rapid -LocalManual -LocalAuto -RemoteManual -RemoteAuto