# Profinet Communication

**URL:** <https://tech-community.robotics.abb.com/t/profinet-communication/4508>\
**Category:** Robot Controller\
**Created:** [October 31, 2011, 4:22pm UTC](https://tech-community.robotics.abb.com/t/profinet-communication/4508 "2011-10-31T16:22:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![cold\_welding](https://avatars.discourse-cdn.com/v4/letter/c/ce73a5/32.png) [@cold\_welding](https://tech-community.robotics.abb.com/u/cold_welding)\
**Post date:** [October 31, 2011, 4:22pm UTC](https://tech-community.robotics.abb.com/t/profinet-communication/4508/1 "2011-10-31T16:22:26Z")

</div>

Hi All,

I have a controller which has Profinet Master/Slave hardware.  
I 'd like to send signals over profinet connection to a slave ET200S I/O unit which has just profinet slave hardware.

Since ET200S doent need any configration, how should i configure my Robot. Is robotstudio or just flexpendant enough for this operation or do i need an extra program ?

Has anyone got any documentation or manual regarding this ? How can i realize this profinet communication process.

I need any information which you could send.  
Thanks…  
Cold\_welding