# program execution freezes on move instruction after exitcycle

**URL:** <https://tech-community.robotics.abb.com/t/program-execution-freezes-on-move-instruction-after-exitcycle/8947>\
**Category:** RAPID Programming\
**Tags:** exitcycle\
**Created:** [July 5, 2019, 6:39am UTC](https://tech-community.robotics.abb.com/t/program-execution-freezes-on-move-instruction-after-exitcycle/8947 "2019-07-05T06:39:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jeppe](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/jeppe/32/3164_2.png) [@jeppe](https://tech-community.robotics.abb.com/u/jeppe)\
**Post date:** [July 5, 2019, 6:39am UTC](https://tech-community.robotics.abb.com/t/program-execution-freezes-on-move-instruction-after-exitcycle/8947/1 "2019-07-05T06:39:28Z")

</div>

Hi,

I use exitcycle as a reset for robots programs, works fine when run mode is on continuous.

However, program execution freezes at the first move command of the new cycle. Program pointer goes to the move instruction, but after that, nothing happens.

Any suggestions how to fix this issue?

Thanks for help!  
-Jeppe

---

<div class="post-metadata">

**Author:** ![jeppe](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/jeppe/32/3164_2.png) [@jeppe](https://tech-community.robotics.abb.com/u/jeppe)\
**Post date:** [July 5, 2019, 7:20am UTC](https://tech-community.robotics.abb.com/t/program-execution-freezes-on-move-instruction-after-exitcycle/8947/2 "2019-07-05T07:20:08Z")

</div>

Never mind, I found the issue!

There wasn’t startmove instruction after stopmove. :#

-Jeppe