# Rapid Data - user.sys file

**URL:** <https://tech-community.robotics.abb.com/t/rapid-data-user-sys-file/642>\
**Category:** Developer Tools\
**Created:** [March 9, 2006, 12:55am UTC](https://tech-community.robotics.abb.com/t/rapid-data-user-sys-file/642 "2006-03-09T00:55:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![TommyT](https://avatars.discourse-cdn.com/v4/letter/t/c57346/32.png) [@TommyT](https://tech-community.robotics.abb.com/u/TommyT)\
**Post date:** [March 9, 2006, 12:55am UTC](https://tech-community.robotics.abb.com/t/rapid-data-user-sys-file/642/1 "2006-03-09T00:55:51Z")

</div>

In the connection to RapidData you must pass the Task, Module, and persistent parameter. Each task has a user.sys file. Is there a way to point to the user.sys file assoicated with the task instead of the module name?

---

<div class="post-metadata">

**Author:** ![RussD](https://avatars.discourse-cdn.com/v4/letter/r/dec6dc/32.png) [@RussD](https://tech-community.robotics.abb.com/u/RussD)\
**Post date:** [March 9, 2006, 3:04pm UTC](https://tech-community.robotics.abb.com/t/rapid-data-user-sys-file/642/2 "2006-03-09T15:04:20Z")

</div>

Does the following not work (where “myVar” is some PERS atomic type in user.sys and ctrl is a reference to a controller object)?

Dim rd As RapidDomain.RapidData

Dim str1 as string

rd = ctrl.Rapid.GetRapidData(“T\_ROB1”, “user”, “myVar”)

str1 = rd.ToString()

As far as I know, any module that is not hidden or protected in some way should be accessible by using its name, which should be the same as its filename. Am I missing something here?

---

<div class="post-metadata">

**Author:** ![TommyT](https://avatars.discourse-cdn.com/v4/letter/t/c57346/32.png) [@TommyT](https://tech-community.robotics.abb.com/u/TommyT)\
**Post date:** [March 9, 2006, 6:18pm UTC](https://tech-community.robotics.abb.com/t/rapid-data-user-sys-file/642/3 "2006-03-09T18:18:20Z")

</div>

Thanks Russ. It worked! I guess if you use “user” for the module name then you can put the persistent data in the user.sys file. Thanks for the help!
