# Rapid symbol was not found

**URL:** <https://tech-community.robotics.abb.com/t/rapid-symbol-was-not-found/5894>\
**Category:** RobotStudio\
**Created:** [December 20, 2013, 3:14pm UTC](https://tech-community.robotics.abb.com/t/rapid-symbol-was-not-found/5894 "2013-12-20T15:14:44Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![arturs](https://avatars.discourse-cdn.com/v4/letter/a/eada6e/32.png) [@arturs](https://tech-community.robotics.abb.com/u/arturs)\
**Post date:** [December 20, 2013, 3:14pm UTC](https://tech-community.robotics.abb.com/t/rapid-symbol-was-not-found/5894/1 "2013-12-20T15:14:44Z")

</div>

Hi

Can anyone help with the “Rapid symbol was not found” error, when I go online to the IRC5 controller? I am new to robotstudio and would appreciate any help. I have got the Rapid technical reference manual, but am not able to find a troubleshooting section.

Thanks  
Arturs