# Raster on Surface

**URL:** <https://tech-community.robotics.abb.com/t/raster-on-surface/5604>\
**Category:** RobotStudio\
**Created:** [July 5, 2013, 10:33am UTC](https://tech-community.robotics.abb.com/t/raster-on-surface/5604 "2013-07-05T10:33:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![WN2013](https://avatars.discourse-cdn.com/v4/letter/w/dbc845/32.png) [@WN2013](https://tech-community.robotics.abb.com/u/WN2013)\
**Post date:** [July 5, 2013, 10:33am UTC](https://tech-community.robotics.abb.com/t/raster-on-surface/5604/1 "2013-07-05T10:33:40Z")

</div>

Hello,

is it possible to have a raster on part surfaces?  
I tried textures, but they didn’t scale exact.  
We want to lay a raster of for example 10 mm on the part surface to programm points and  
have an orientation where they are.

Best Regards  
Wolfgang