# Real FlexPendant

**URL:** <https://tech-community.robotics.abb.com/t/real-flexpendant/4548>\
**Category:** RobotStudio\
**Created:** [November 25, 2011, 1:07pm UTC](https://tech-community.robotics.abb.com/t/real-flexpendant/4548 "2011-11-25T13:07:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tmgaspar](https://avatars.discourse-cdn.com/v4/letter/t/53a042/32.png) [@tmgaspar](https://tech-community.robotics.abb.com/u/tmgaspar)\
**Post date:** [November 25, 2011, 1:07pm UTC](https://tech-community.robotics.abb.com/t/real-flexpendant/4548/1 "2011-11-25T13:07:21Z")

</div>

Hi mates,

do you know if it is possible to connect a real Flex Pendant to RobotStudio? If so, where can I read about it?

Best regards

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [November 25, 2011, 2:35pm UTC](https://tech-community.robotics.abb.com/t/real-flexpendant/4548/2 "2011-11-25T14:35:58Z")

</div>

Hi,No it is not.

---

<div class="post-metadata">

**Author:** ![tmgaspar](https://avatars.discourse-cdn.com/v4/letter/t/53a042/32.png) [@tmgaspar](https://tech-community.robotics.abb.com/u/tmgaspar)\
**Post date:** [November 28, 2011, 10:06am UTC](https://tech-community.robotics.abb.com/t/real-flexpendant/4548/3 "2011-11-28T10:06:00Z")

</div>

Hi

Thanks Anders!

Best regards,  
Tiago Gaspar