# Remove Gradient Background

**URL:** <https://tech-community.robotics.abb.com/t/remove-gradient-background/10315>\
**Category:** RobotStudio\
**Created:** [August 10, 2021, 10:42am UTC](https://tech-community.robotics.abb.com/t/remove-gradient-background/10315 "2021-08-10T10:42:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![spg666](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@spg666](https://tech-community.robotics.abb.com/u/spg666)\
**Post date:** [August 10, 2021, 10:42am UTC](https://tech-community.robotics.abb.com/t/remove-gradient-background/10315/1 "2021-08-10T10:42:18Z")

</div>

I’d like to grab some screenshots of my model for use on a HMI. For this to work I need a flat colour background.

How can I turn off the gradient background in the model window?

---

<div class="post-metadata">

**Author:** ![DanielWright](https://avatars.discourse-cdn.com/v4/letter/d/df705f/32.png) [@DanielWright](https://tech-community.robotics.abb.com/u/DanielWright)\
**Post date:** [August 10, 2021, 9:57pm UTC](https://tech-community.robotics.abb.com/t/remove-gradient-background/10315/2 "2021-08-10T21:57:23Z")

</div>

I use an addon that is located in this thread:  
[https://forums.robotstudio.com/discussion/9456/robotstudio-gradient-backgound](https://forums.robotstudio.com/discussion/9456/robotstudio-gradient-backgound)

---

<div class="post-metadata">

**Author:** ![spg666](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@spg666](https://tech-community.robotics.abb.com/u/spg666)\
**Post date:** [September 9, 2021, 2:42pm UTC](https://tech-community.robotics.abb.com/t/remove-gradient-background/10315/3 "2021-09-09T14:42:18Z")

</div>

Sorry for the slow response, did look at it but a bit nervous about a dll. How do you install it into robotstudio? and where?