# Request: Translating Path in Painting PowerPac

**URL:** <https://tech-community.robotics.abb.com/t/request-translating-path-in-painting-powerpac/11103>\
**Category:** UpFeed\
**Created:** [April 27, 2023, 9:52am UTC](https://tech-community.robotics.abb.com/t/request-translating-path-in-painting-powerpac/11103 "2023-04-27T09:52:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Neily03](https://avatars.discourse-cdn.com/v4/letter/n/c6cbf5/32.png) [@Neily03](https://tech-community.robotics.abb.com/u/Neily03)\
**Post date:** [April 27, 2023, 9:52am UTC](https://tech-community.robotics.abb.com/t/request-translating-path-in-painting-powerpac/11103/1 "2023-04-27T09:52:11Z")

</div>

Could it be made so that when translating a path in the Painting PowerPac the SetBrush events are also translated? As it is the ones that are the same direction as the path is moved are left behind and have to be manually dragged one at a time back into the path…

[https://www.youtube.com/watch?v=BBsgaQsfTMI](https://www.youtube.com/watch?v=BBsgaQsfTMI)

---

<div class="post-metadata">

**Author:** ![Maxim](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/maxim/32/4429_2.png) [@Maxim](https://tech-community.robotics.abb.com/u/Maxim)\
**Post date:** [April 27, 2023, 7:19pm UTC](https://tech-community.robotics.abb.com/t/request-translating-path-in-painting-powerpac/11103/2 "2023-04-27T19:19:47Z")

</div>

Hello there,

As Painting Powerpac isn’t developed by the RobotStudio team, it’d be best to reach out to your local ABB with this feature request.