# Restore States using Smart Components ?

**URL:** <https://tech-community.robotics.abb.com/t/restore-states-using-smart-components/4030>\
**Category:** RobotStudio\
**Created:** [January 31, 2011, 6:14pm UTC](https://tech-community.robotics.abb.com/t/restore-states-using-smart-components/4030 "2011-01-31T18:14:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mikael](https://avatars.discourse-cdn.com/v4/letter/m/f04885/32.png) [@Mikael](https://tech-community.robotics.abb.com/u/Mikael)\
**Post date:** [January 31, 2011, 6:14pm UTC](https://tech-community.robotics.abb.com/t/restore-states-using-smart-components/4030/1 "2011-01-31T18:14:04Z")

</div>

Dear all,

I have noticed that it is possible to decide which saved State should be restored when starting a simulation using the ?_oSimulation Scenarios?_\_ in ?\_oSetup Simulation?\_\_. However, is it also possible to restore states using Smart Components in case I want to do so during simulation (and not only when starting a new simulation)?

Best regards,

Mikael

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [February 1, 2011, 4:39pm UTC](https://tech-community.robotics.abb.com/t/restore-states-using-smart-components/4030/2 "2011-02-01T16:39:23Z")

</div>

Hi Mikael,  
No, that is not possible.

---

<div class="post-metadata">

**Author:** ![Mikael](https://avatars.discourse-cdn.com/v4/letter/m/f04885/32.png) [@Mikael](https://tech-community.robotics.abb.com/u/Mikael)\
**Post date:** [February 1, 2011, 4:45pm UTC](https://tech-community.robotics.abb.com/t/restore-states-using-smart-components/4030/3 "2011-02-01T16:45:04Z")

</div>

Hi Anders,

Ok, thanks!

BR / Mikael