# RMQ is not configured for the task

**URL:** <https://tech-community.robotics.abb.com/t/rmq-is-not-configured-for-the-task/7387>\
**Category:** Developer Tools\
**Tags:** rapid, message\
**Created:** [October 10, 2016, 12:42pm UTC](https://tech-community.robotics.abb.com/t/rmq-is-not-configured-for-the-task/7387 "2016-10-10T12:42:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![baijun](https://avatars.discourse-cdn.com/v4/letter/b/e0b2c6/32.png) [@baijun](https://tech-community.robotics.abb.com/u/baijun)\
**Post date:** [October 10, 2016, 12:42pm UTC](https://tech-community.robotics.abb.com/t/rmq-is-not-configured-for-the-task/7387/1 "2016-10-10T12:42:40Z")

</div>

Hello,  
I’m trying to use RAPID Message Queues but I found that the RAPID program will output the error prompt (RMQ is not configured for the task) . I do not quite understand, I opened the PC interface option, according to the document (Application manual-Controller software IRC5) can know the communication option RAPID Message Queue included in the PC interface.  
Some people know how to deal with this ? Very appreciated for your help!