# RMQ settings when set up task

**URL:** <https://tech-community.robotics.abb.com/t/rmq-settings-when-set-up-task/7858>\
**Category:** Robot Controller\
**Created:** [August 16, 2017, 11:05am UTC](https://tech-community.robotics.abb.com/t/rmq-settings-when-set-up-task/7858 "2017-08-16T11:05:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![blueberry](https://avatars.discourse-cdn.com/v4/letter/b/54ee81/32.png) [@blueberry](https://tech-community.robotics.abb.com/u/blueberry)\
**Post date:** [August 16, 2017, 11:05am UTC](https://tech-community.robotics.abb.com/t/rmq-settings-when-set-up-task/7858/1 "2017-08-16T11:05:21Z")

</div>

Hello,

Can someone explain the differences between RMQ mode (internal/remote) and also RMQ type (interrupt/synchronous) please?

I saw the RMQ options when setting up tasks and was wondering what are the settings for/when to use them.

Thank you !

---

<div class="post-metadata">

**Author:** ![Rookie](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/rookie/32/3238_2.png) [@Rookie](https://tech-community.robotics.abb.com/u/Rookie)\
**Post date:** [December 27, 2017, 9:47am UTC](https://tech-community.robotics.abb.com/t/rmq-settings-when-set-up-task/7858/2 "2017-12-27T09:47:04Z")

</div>

RMQ is when you use a SDK for controlling the robot. In that way you can specify where the messages are coming from.

Hope this helps.