# Robostduio VR Passthrough Mode

**URL:** <https://tech-community.robotics.abb.com/t/robostduio-vr-passthrough-mode/15021>\
**Category:** UpFeed\
**Tags:** robot-studio\
**Created:** [June 21, 2026, 1:13pm UTC](https://tech-community.robotics.abb.com/t/robostduio-vr-passthrough-mode/15021 "2026-06-21T13:13:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rengoku\_sama](https://avatars.discourse-cdn.com/v4/letter/r/74df32/32.png) [@rengoku\_sama](https://tech-community.robotics.abb.com/u/rengoku_sama)\
**Post date:** [June 21, 2026, 1:13pm UTC](https://tech-community.robotics.abb.com/t/robostduio-vr-passthrough-mode/15021/1 "2026-06-21T13:13:37Z")

</div>

Hi everyone. I’ve successfully connected RoboStudio and VR. However, I haven’t been able to find or configure VR Passthrough mode. I’m uploading the glb file I get from the Simulation tab to my MetaQuest 3 headset and trying to run it there, but the applications I’m using are providing very poor image quality. Have you ever managed to switch to Passthrough mode within a simulation while both the headset and RobotStudio are connected? If so, how?