# Robot Models to .sat **URL:** \ **Category:** RobotStudio\ **Created:** [November 29, 2007, 4:58pm UTC](https://tech-community.robotics.abb.com/t/robot-models-to-sat/1557 "2007-11-29T16:58:12Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![dh\_custompak](https://avatars.discourse-cdn.com/v4/letter/d/ac91a4/32.png) [@dh\_custompak](https://tech-community.robotics.abb.com/u/dh_custompak)\ **Post date:** [November 29, 2007, 4:58pm UTC](https://tech-community.robotics.abb.com/t/robot-models-to-sat/1557/1 "2007-11-29T16:58:12Z")
Hi, I was curious is there anyway to transfer all the models that I have includeing the robots into a sat file or any other file that can be opened by solid works? it would be nice to have something other people can open up around my work and be able to view the proposed set up with the robots edit: and i do know that there is an export geometry option, but I would like to export everything at once, and keep it in its relative location ---
**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\ **Post date:** [November 30, 2007, 9:37am UTC](https://tech-community.robotics.abb.com/t/robot-models-to-sat/1557/2 "2007-11-30T09:37:36Z")
Hi, Unfortunately is that not possible. The only thing you can export from a RS station are individual parts to sat files. ---
**Author:** ![Saibel](https://avatars.discourse-cdn.com/v4/letter/s/d6d6ee/32.png) [@Saibel](https://tech-community.robotics.abb.com/u/Saibel)\ **Post date:** [December 30, 2007, 3:05pm UTC](https://tech-community.robotics.abb.com/t/robot-models-to-sat/1557/3 "2007-12-30T15:05:49Z")
Hi Dustin, I have found a way to export the whole station to one .sat file. Contact me at [sergej.saibel@allelektro.se](mailto:sergej.saibel@allelektro.se) and I will help you. Best regards Sergej