# robot moving with the values of the  analog output velocity

**URL:** <https://tech-community.robotics.abb.com/t/robot-moving-with-the-values-of-the-analog-output-velocity/8903>\
**Category:** RAPID Programming\
**Created:** [June 17, 2019, 2:52pm UTC](https://tech-community.robotics.abb.com/t/robot-moving-with-the-values-of-the-analog-output-velocity/8903 "2019-06-17T14:52:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![HyacyKcharel](https://avatars.discourse-cdn.com/v4/letter/h/58956e/32.png) [@HyacyKcharel](https://tech-community.robotics.abb.com/u/HyacyKcharel)\
**Post date:** [June 17, 2019, 2:52pm UTC](https://tech-community.robotics.abb.com/t/robot-moving-with-the-values-of-the-analog-output-velocity/8903/1 "2019-06-17T14:52:07Z")

</div>

I need to replace the speed of my robot by the speed I got from the analog output in a regular time interval!

---

<div class="post-metadata">

**Author:** ![lemster68](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/lemster68/32/1945_2.png) [@lemster68](https://tech-community.robotics.abb.com/u/lemster68)\
**Post date:** [June 17, 2019, 4:48pm UTC](https://tech-community.robotics.abb.com/t/robot-moving-with-the-values-of-the-analog-output-velocity/8903/2 "2019-06-17T16:48:50Z")

</div>

You could use a timed interrupt with the speedrefresh command.
