# Robot Path Length - Intended Functionality?

**URL:** <https://tech-community.robotics.abb.com/t/robot-path-length-intended-functionality/15227>\
**Category:** General\
**Created:** [November 16, 2026, 8:37pm UTC](https://tech-community.robotics.abb.com/t/robot-path-length-intended-functionality/15227 "2026-11-16T20:37:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JBult](https://avatars.discourse-cdn.com/v4/letter/j/91b2a8/32.png) [@JBult](https://tech-community.robotics.abb.com/u/JBult)\
**Post date:** [November 16, 2026, 8:37pm UTC](https://tech-community.robotics.abb.com/t/robot-path-length-intended-functionality/15227/1 "2026-11-16T20:37:18Z")

</div>

I am using the RAPID commands PathLengthStart, PathLengthEnd, and PathLengthGet() to automatically determine a weld path length. However, it seems like path deviations in Tool Z from thru-arc tracking corrections are added to the total path length. Is that the intended functionality of the PathLength commands?
