# robot position

**URL:** <https://tech-community.robotics.abb.com/t/robot-position/5059>\
**Category:** Robot Controller\
**Created:** [August 30, 2012, 11:48am UTC](https://tech-community.robotics.abb.com/t/robot-position/5059 "2012-08-30T11:48:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![londoneye](https://avatars.discourse-cdn.com/v4/letter/l/e79b87/32.png) [@londoneye](https://tech-community.robotics.abb.com/u/londoneye)\
**Post date:** [August 30, 2012, 11:48am UTC](https://tech-community.robotics.abb.com/t/robot-position/5059/1 "2012-08-30T11:48:55Z")

</div>

Hello

When you are running a program manual step by step, is it possible to know if the robot is in the robtarget or moved. I mean, in fanuc, when the robot is in a programmed position, in the routine you can see a @ sign. Is there something similar in ABB, so that you know if the robot is in the position programmed or slightly different?

Best regards.

---

<div class="post-metadata">

**Author:** ![Steve\_Murphy](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@Steve\_Murphy](https://tech-community.robotics.abb.com/u/Steve_Murphy)\
**Post date:** [September 4, 2012, 9:12am UTC](https://tech-community.robotics.abb.com/t/robot-position/5059/2 "2012-09-04T09:12:58Z")

</div>

Hello,

On the FlexPendant, there is a little robot symbol indicating the current position of the robot with respect to the program pointer (as indicated by an arrow at the active instruction).  
When stepping through a program, the program pointer will move first, then when the motion is completed, the robot symbol will move the finished motion instruction.

Kind Regards,

Steve
