# Robot Studio 5.11.02 Virtual Controller Issue

**URL:** <https://tech-community.robotics.abb.com/t/robot-studio-5-11-02-virtual-controller-issue/2556>\
**Category:** RobotStudio\
**Created:** [March 2, 2009, 10:04pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-5-11-02-virtual-controller-issue/2556 "2009-03-02T22:04:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dh\_custompak](https://avatars.discourse-cdn.com/v4/letter/d/ac91a4/32.png) [@dh\_custompak](https://tech-community.robotics.abb.com/u/dh_custompak)\
**Post date:** [March 2, 2009, 10:04pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-5-11-02-virtual-controller-issue/2556/1 "2009-03-02T22:04:34Z")

</div>

Hi,  
We just installed 5.11.02, and upgrade from 5.10, and we are now getting an error when trying to start any station.

“There was a problem when initializing the Virtual Controller  
Create RobCtrlInfo failed, hr=80080005  
Select Retry to start the system again orCancel to remove the system”

We have tryed opening different stations, it happens every time the virtual controller attempts to start.  
I have attached a screen shot.

Thanks,  
Dustin

![](http://forums.robotstudio.com/webwiz/993/robotstudioissue.jpg)

---

<div class="post-metadata">

**Author:** ![Johannes\_Weiman\_old\_account](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/johannes_weiman_old_account/32/3345_2.png) [@Johannes\_Weiman\_old\_account](https://tech-community.robotics.abb.com/u/Johannes_Weiman_old_account)\
**Post date:** [March 3, 2009, 8:29am UTC](https://tech-community.robotics.abb.com/t/robot-studio-5-11-02-virtual-controller-issue/2556/2 "2009-03-03T08:29:26Z")

</div>

Hi Dustin,

Try running “Reg\_ComServer\_NetScan.cmd” from the Utilities folder of the RobotWare DVD.

regards,  
Johannes