# Robot studio 6.01 system catalog is empty

**URL:** <https://tech-community.robotics.abb.com/t/robot-studio-6-01-system-catalog-is-empty/6653>\
**Category:** RobotStudio\
**Created:** [June 1, 2015, 2:17pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-6-01-system-catalog-is-empty/6653 "2015-06-01T14:17:09Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alexandr](https://avatars.discourse-cdn.com/v4/letter/a/71c47a/32.png) [@Alexandr](https://tech-community.robotics.abb.com/u/Alexandr)\
**Post date:** [June 1, 2015, 2:17pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-6-01-system-catalog-is-empty/6653/1 "2015-06-01T14:17:09Z")

</div>

Please help! When you open a file of example program does not find the system as the directory that contains it is empty. Where can I download the installation files that contain the system pool? Or is it a feature of the trial version?

---

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [June 2, 2015, 5:37pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-6-01-system-catalog-is-empty/6653/2 "2015-06-02T17:37:52Z")

</div>

RobotWare is installed with RobotStudio from version 6 onwards. The trial version is complete and contains everything.

The first thing you need to do is to create and start your virtual controller. The easiest way it to do File → New → Solution with Station and Robot Controller → Create new (select RobotWare and robot model, i.e. IRB 140) → Create

The system will be created and started and the corresponding robot imported into the station. At this point you can open a RAPID program from the controller tab.

Kind regards,

Henrik

---

<div class="post-metadata">

**Author:** ![Alexandr](https://avatars.discourse-cdn.com/v4/letter/a/71c47a/32.png) [@Alexandr](https://tech-community.robotics.abb.com/u/Alexandr)\
**Post date:** [June 3, 2015, 2:42pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-6-01-system-catalog-is-empty/6653/3 "2015-06-03T14:42:04Z")

</div>

I did. The program writes: The system could not be created (in window) and output - Exception^ Product installation is failed for new system creation Internal Error (((

---

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [June 5, 2015, 6:21pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-6-01-system-catalog-is-empty/6653/4 "2015-06-05T18:21:46Z")

</div>

Please report the problem to your local ABB Robotics Service representative (see [http://www.abb.com/contacts](http://www.abb.com/contacts)), or, alternatively, upload the RobotStudio support logs and a screen shot of the error message so that we can get a better understanding of the error message.

From the RobotStudio Operating Manual:

_Generate a Full Scan with the RobotStudio Support Tool available next to RobotStudio in the Start menu. (Click Start \> Programs \> ABB Industrial IT \> Robotics IT \> RobotStudio \> RobotStudio Support Tool, then click on Run Full Scan and then click Save Report. Save this report and attach it with your problem description._

Kind regards,

Henrik