# Robot Studio Path

**URL:** <https://tech-community.robotics.abb.com/t/robot-studio-path/2659>\
**Category:** Robot Controller\
**Created:** [April 8, 2009, 7:04pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-path/2659 "2009-04-08T19:04:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/system/32/6_2.png) [@system](https://tech-community.robotics.abb.com/u/system)\
**Post date:** [April 8, 2009, 7:04pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-path/2659/1 "2009-04-08T19:04:09Z")

</div>

Is there any add-ins that makes it easier to apply path to contoured surfaces in Robot Studio? I have a sand blasting application where I need to maintain overlap, normality and distance on a complex contour surface. Does the paint package have any tools that would assist and do you need an additional license to run it?

---

<div class="post-metadata">

**Author:** ![hcui](https://avatars.discourse-cdn.com/v4/letter/h/ee59a6/32.png) [@hcui](https://tech-community.robotics.abb.com/u/hcui)\
**Post date:** [April 22, 2009, 5:22pm UTC](https://tech-community.robotics.abb.com/t/robot-studio-path/2659/2 "2009-04-22T17:22:25Z")

</div>

see the link [http://en.inter-smart.com/display.asp?ibws=27](http://en.inter-smart.com/display.asp?ibws=27)