# RobotStudio 5.14 "Restore Assistant"?

**URL:** <https://tech-community.robotics.abb.com/t/robotstudio-5-14-restore-assistant/4228>\
**Category:** RobotStudio\
**Created:** [June 9, 2011, 11:26am UTC](https://tech-community.robotics.abb.com/t/robotstudio-5-14-restore-assistant/4228 "2011-06-09T11:26:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![matej](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@matej](https://tech-community.robotics.abb.com/u/matej)\
**Post date:** [June 9, 2011, 11:26am UTC](https://tech-community.robotics.abb.com/t/robotstudio-5-14-restore-assistant/4228/1 "2011-06-09T11:26:59Z")

</div>

Hello everyone

Is there any kind of “restore assistant” in RobotStudio?  
It would be great help it was developped.

(I just got a “fatal error” after working about 1.5h on a new station, and lost everything…)

Thank you in advance  
Best Regards  
Matej

---

<div class="post-metadata">

**Author:** ![Klaus](https://avatars.discourse-cdn.com/v4/letter/k/e99b99/32.png) [@Klaus](https://tech-community.robotics.abb.com/u/Klaus)\
**Post date:** [June 9, 2011, 12:39pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-5-14-restore-assistant/4228/2 "2011-06-09T12:39:23Z")

</div>

After fatal error and reopen your cell RS will come whit at msg with autoload if there is a recovery. if not too bad. Use autosave to avoid loss of data.