# Robotstudio 5.60 Stationviewer --\> Record to viewer problem

**URL:** <https://tech-community.robotics.abb.com/t/robotstudio-5-60-stationviewer-record-to-viewer-problem/6015>\
**Category:** RobotStudio\
**Created:** [March 12, 2014, 2:42pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-5-60-stationviewer-record-to-viewer-problem/6015 "2014-03-12T14:42:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![HOC](https://avatars.discourse-cdn.com/v4/letter/h/779978/32.png) [@HOC](https://tech-community.robotics.abb.com/u/HOC)\
**Post date:** [March 12, 2014, 2:42pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-5-60-stationviewer-record-to-viewer-problem/6015/1 "2014-03-12T14:42:36Z")

</div>

Hello,

we are using Robotstudio for several years. After we finished the simulation we use the function Simulation / Record to viewer to generate the \*.exe File ( afterwards i get the exe file in which the simulation can be runned by using the Play-Button). It worked well until now.

When i use Robotstudio 5.60 i can create the simulation like in 5.15. But when i start the exe File and run the simulation, the viewer stops after some seconds by an errormessage and i have to close it again. I tried to run the viewer on several computers, but always the same error.

The same simulation worked well in 5.15. I only replaced the robot 6640 by a 6700. So i can not go back to 5.15 anymore.

Is this a bug in 5.60, or ist there a solution?

Thank you for a feedback.

Regards

---

<div class="post-metadata">

**Author:** ![Niklas\_Skoglund](https://avatars.discourse-cdn.com/v4/letter/n/5fc32e/32.png) [@Niklas\_Skoglund](https://tech-community.robotics.abb.com/u/Niklas_Skoglund)\
**Post date:** [April 16, 2014, 5:59pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-5-60-stationviewer-record-to-viewer-problem/6015/2 "2014-04-16T17:59:52Z")

</div>

Hi, you have better chances getting an answer in the main RobotStudio forum. This is for Controller SDK CTP. I can see that we have lots of posts here which are not about Controller SDK.

Before I simply help everybody by moving them over, I would like to ask you if there is something in the user interface in the forum application that would make it easier to see the difference between the different forums

:-\*

---

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [April 23, 2014, 3:54pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-5-60-stationviewer-record-to-viewer-problem/6015/3 "2014-04-23T15:54:17Z")

</div>

There was a problem with 64-bit station viewers in RobotStudio 5.60 that appeared on some PCs. This problem is solved in 5.61 that is available for download.

There is however a remaining problem that appears on PCs with built-in graphics.

I recommend you to try with RobotStudio 5.61, and if it still fails, share a snapshot of the error message and we can take it from there.

/Henrik