# RobotStudio Integrated Vision and In-Sight Explorer camera emulator

**URL:** <https://tech-community.robotics.abb.com/t/robotstudio-integrated-vision-and-in-sight-explorer-camera-emulator/11601>\
**Category:** RobotStudio\
**Created:** [September 10, 2024, 12:27pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-integrated-vision-and-in-sight-explorer-camera-emulator/11601 "2024-09-10T12:27:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![samirasanen](https://avatars.discourse-cdn.com/v4/letter/s/f4b2a3/32.png) [@samirasanen](https://tech-community.robotics.abb.com/u/samirasanen)\
**Post date:** [September 10, 2024, 12:27pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-integrated-vision-and-in-sight-explorer-camera-emulator/11601/1 "2024-09-10T12:27:07Z")

</div>

Hi

what is the correct way to use Cognex In-Sight camera emulator with virtual controller? I do not want to use RobotStudio camera emulator. In RAPID, I can set Cognex camera emulator to program mode and I can load certain job to camera emulator and I can read thatwhat job is loaded, but CamSetRunMode gives communication timeout. Am I missing something?