# Robotstudio robot program upload eroor in Process Simulate

**URL:** <https://tech-community.robotics.abb.com/t/robotstudio-robot-program-upload-eroor-in-process-simulate/7240>\
**Category:** RobotStudio\
**Tags:** robotstudio-simulation\
**Created:** [June 28, 2016, 12:47pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-robot-program-upload-eroor-in-process-simulate/7240 "2016-06-28T12:47:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CVHL](https://avatars.discourse-cdn.com/v4/letter/c/73ab20/32.png) [@CVHL](https://tech-community.robotics.abb.com/u/CVHL)\
**Post date:** [June 28, 2016, 12:47pm UTC](https://tech-community.robotics.abb.com/t/robotstudio-robot-program-upload-eroor-in-process-simulate/7240/1 "2016-06-28T12:47:22Z")

</div>

Hello!  
I’m currently working with creating a factory model in process simulate, for this I need to upload robot programs from Robotstudio, but whenever I try this I get an error message: “Error at file MyProgram.mod: Upload of programn MyProgram.mod failed” What could cause this to happen? Have I saved the robot program falsely?  
Best regards  
/CVHL

---

<div class="post-metadata">

**Author:** ![sturner](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/sturner/32/3432_2.png) [@sturner](https://tech-community.robotics.abb.com/u/sturner)\
**Post date:** [June 30, 2016, 10:58am UTC](https://tech-community.robotics.abb.com/t/robotstudio-robot-program-upload-eroor-in-process-simulate/7240/2 "2016-06-30T10:58:56Z")

</div>

Hi  
I am not a Process Simulate user, however I understand that you will require the offline programming module 'OLP '.

Kind regards