# robotstudio SDK path Auto-Configuration

**URL:** https://tech-community.robotics.abb.com/t/robotstudio-sdk-path-auto-configuration/8108
**Category:** RobotStudio
**Tags:** robotstudio-sdk
**Created:** [February 23, 2018, 11:26am UTC](https://tech-community.robotics.abb.com/t/robotstudio-sdk-path-auto-configuration/8108 "2018-02-23T11:26:59Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![HighFlyer](https://avatars.discourse-cdn.com/v4/letter/h/c0e974/32.png) [@HighFlyer](https://tech-community.robotics.abb.com/u/HighFlyer)
#### Post date: [February 23, 2018, 11:26am UTC](https://tech-community.robotics.abb.com/t/robotstudio-sdk-path-auto-configuration/8108/1 "2018-02-23T11:26:59Z")

</div>

I am using robotstudio sdk to create target points and then to create a path. However I have not been able to find the code as how to Auto Configure the path through the sdk. I appreciate any feedbacks.

Thank you.