# rs files

**URL:** https://tech-community.robotics.abb.com/t/rs-files/4691
**Category:** RobotStudio
**Created:** [February 21, 2012, 8:29pm UTC](https://tech-community.robotics.abb.com/t/rs-files/4691 "2012-02-21T20:29:09Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Tom127](https://avatars.discourse-cdn.com/v4/letter/t/6bbea6/32.png) [@Tom127](https://tech-community.robotics.abb.com/u/Tom127)
#### Post date: [February 21, 2012, 8:29pm UTC](https://tech-community.robotics.abb.com/t/rs-files/4691/1 "2012-02-21T20:29:09Z")

</div>

Hi, i’m new to robot studio but have written a program which I want to load to our robot. T I have saved the program but when I try to load it to the robot it doesn’t accept the .rs file. How do I change the station (rs) file to a .mod file please.

---

<div class="post-metadata">

### Author: ![graemepaulin](https://avatars.discourse-cdn.com/v4/letter/g/258eb7/32.png) [@graemepaulin](https://tech-community.robotics.abb.com/u/graemepaulin)
#### Post date: [February 22, 2012, 9:16am UTC](https://tech-community.robotics.abb.com/t/rs-files/4691/2 "2012-02-22T09:16:55Z")

</div>

Hi,

You need to sync the station to the virtual controller, then save the program or module.  
The RobotStudio help will show you the detail of how to do this.

Regards  
Graeme

---

<div class="post-metadata">

### Author: ![Tom127](https://avatars.discourse-cdn.com/v4/letter/t/6bbea6/32.png) [@Tom127](https://tech-community.robotics.abb.com/u/Tom127)
#### Post date: [February 22, 2012, 11:08am UTC](https://tech-community.robotics.abb.com/t/rs-files/4691/3 "2012-02-22T11:08:49Z")

</div>

😉 Thanks, sorted!