# RS SDK: Exporting geometries

**URL:** <https://tech-community.robotics.abb.com/t/rs-sdk-exporting-geometries/5699>\
**Category:** Developer Tools\
**Created:** [September 5, 2013, 1:44pm UTC](https://tech-community.robotics.abb.com/t/rs-sdk-exporting-geometries/5699 "2013-09-05T13:44:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![blind3rr](https://avatars.discourse-cdn.com/v4/letter/b/97f17d/32.png) [@blind3rr](https://tech-community.robotics.abb.com/u/blind3rr)\
**Post date:** [September 5, 2013, 1:44pm UTC](https://tech-community.robotics.abb.com/t/rs-sdk-exporting-geometries/5699/1 "2013-09-05T13:44:41Z")

</div>

Hello,

I am beginner in C# programming and also with RS SDK.

Could anyone please help me with an example, how to make some function for exporting geometries from RobotStudio?

Is it possible to export more parts at once, or export geometries in .CATPart, .CATProduct format (or .step)?

I will be grateful for any information.

BR,

blinder

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [September 10, 2013, 7:27am UTC](https://tech-community.robotics.abb.com/t/rs-sdk-exporting-geometries/5699/2 "2013-09-10T07:27:26Z")

</div>

Hi,  
You can only export geometries to ACIS (.sat) with the RS SDK. If you write an Add-In you can export more parts at once.  
The Add-In “Export Geometries” on RobotApps take all bodies in a station and places them into one part that will be exported to an ACIS file.

Best regards,  
Anders