# RS5.07 certified user course  lathe model

**URL:** <https://tech-community.robotics.abb.com/t/rs5-07-certified-user-course-lathe-model/914>\
**Category:** RobotStudio\
**Created:** [October 31, 2006, 9:54pm UTC](https://tech-community.robotics.abb.com/t/rs5-07-certified-user-course-lathe-model/914 "2006-10-31T21:54:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sturner](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/sturner/32/3432_2.png) [@sturner](https://tech-community.robotics.abb.com/u/sturner)\
**Post date:** [October 31, 2006, 9:54pm UTC](https://tech-community.robotics.abb.com/t/rs5-07-certified-user-course-lathe-model/914/1 "2006-10-31T21:54:53Z")

</div>

Hi

Can anyone supply me the solid model of the lathe, as used in exercise 4.1 of the certified user course.

It appears to be missing from the CourseWare I have got.

Many thanks

:stuck\_out\_tongue\_winking\_eye:

---

<div class="post-metadata">

**Author:** ![AndersJ](https://avatars.discourse-cdn.com/v4/letter/a/f14d63/32.png) [@AndersJ](https://tech-community.robotics.abb.com/u/AndersJ)\
**Post date:** [November 1, 2006, 9:12am UTC](https://tech-community.robotics.abb.com/t/rs5-07-certified-user-course-lathe-model/914/2 "2006-11-01T09:12:50Z")

</div>

Hi,

The courseware package is now updated (061031) so if you download it again this model will be included.

Best Regards,

* * *

Anders Jahnberg  
ABB Automation Technologies