# Safe move Configaration .... ????

**URL:** <https://tech-community.robotics.abb.com/t/safe-move-configaration/3464>\
**Category:** RobotStudio\
**Created:** [March 25, 2010, 6:09am UTC](https://tech-community.robotics.abb.com/t/safe-move-configaration/3464 "2010-03-25T06:09:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![robo15](https://avatars.discourse-cdn.com/v4/letter/r/e79b87/32.png) [@robo15](https://tech-community.robotics.abb.com/u/robo15)\
**Post date:** [March 25, 2010, 6:09am UTC](https://tech-community.robotics.abb.com/t/safe-move-configaration/3464/1 "2010-03-25T06:09:36Z")

</div>

Hello … !!

I’m trying to setup a safe move with Dual sync switch optionI’m able to sync the robot with sync switch but I’m failing to create the zone where the robot should not enter …  
can anybody guide me …  
How to create the the zone where the robot shuld not go …

:grinning: :nauseated\_face: